ElektroPhysik
E-9
Instrument settings
6.6 Display contrast
Contrast can be set from
•
0...100% (default setting: 50%)
The higher the value, the higher the contrast.
The display contrast is susceptible to changes in ambient
temperature. Low temperatures result in poor contrast,
high temperatures increase contrast. Make sure to adjust
contrast not below a readable level, otherwise you will
not be able to make further settings or operate the gauge.
6.7 Display backlight
You can choose from
•
ON (Display and keys are backlit)
•
OFF (default setting)
6.8 Language
You can choose from
•
German
•
French
•
Spanish
•
English (default setting)
•
further languages upon request
6.9 Setting mode
For the dialogue „Test parameters“ you can choose
from
•
Thickness [mm]
⇒
[kV] (default setting)
•
Thickness [mils]
⇒
[kV]
Test voltage changes automatically according to the
adjusted coating thickness.
•
Voltage [kV]
⇒
[mm]
•
Voltage [kV]
⇒
[mils]
If you change the parameter „voltage“, the coating
thickness will change accordingly.
6.10 Display mode
For the dialogue „Current readings“ you can choose
from:
• No. of pores
• Test voltage
• Pores and voltage (default setting)
