Resistance Welder MULTISPOT MI-100-3
Operation
39
1.
Insert appropriate contact piece
(
Fig. 46
) into welding gun.
2.
Insert threaded stud into contact piece
until limit stop.
3.
Select "weld on studs" mode and
sheet thickness on display.
4.
Decrease power by one step for studs
of 4 mm Ø.
5.
Increase power by one step for studs
of 6 mm Ø.
6.
Position welding gun with the stud at
the welding point and press slightly.
7.
Press and keep hold of release button
of the gun until welding program has
ended.
Fig. 46: Contact piece “threaded stud”
Threaded studs without collar can also be welded on. Use a nut in place of a collar. The part to be
welded should project from the nut about 1 to 2 mm. Welding procedure as described above.
