Elektrom digitakt, Quick Manual

Page: 14 / 36

14
2.2 REAR PANEL CONNECTIONS
1 2 3 4 5 6 8 7 9
1.
POWER,
Switch for turning the unit on and off.
2. DC In, Input for power supply. Use the included PSU-3b power adapter, connected to
a power outlet.
3. USB, For connecting the unit to a computer. For MIDI-control or Overbridge use.
Use the included A to B USB 2.0 connector cable to connect to a computer host.
4. MIDI THRU/SYNC B, Forwards data from MIDI IN. Can also be configured to send DIN
sync to legacy instruments. Use a standard MIDI cable to connect another MIDI device
in the chain.
5.
MIDI OUT/SYNC A,
MIDI data output. Can also be configured to send DIN sync to
legacy instruments. Use a standard MIDI cable to connect to MIDI In of an external
MIDI device.
6. MIDI IN, MIDI data input. Use a standard MIDI cable to connect to MIDI Out of an exter-
nal MIDI device.
7.
INPUT L/R,
Audio inputs. Use a 1/4” mono phone plug (unbalanced connection).
8. OUTPUT L/R, Main audio outputs. Use either 1/4” mono phone plug (unbalanced
connection) or 1/4” (Tip/Ring/Sleeve) phone plug (balanced connection).
9. HEADPHONES, Audio output for stereo headphones. Use 1/4” (Tip/Ring/Sleeve)
phone plug.