Elektro Maschinen 35014500750, Operating Instructions Manual, Page: 12 / 44

Pump runs continuously:
x
Float switch does not reach lower
position.
Make sure the float switch can
move unrestricted.
A
Danger!
Repairs to electric tools must
only be carried out by a qualified
electrician!
Electric tools in need of repair can be
sent to an authorised service center in
your country. See spare parts list for
address.
Please attach a description of the fault to
the electric tool.
The packaging of the pump can be
100 % recycled.
Worn out power tools and accessories
contain considerable amounts of valua-
ble raw and plastic materials, which can
be recycled.
These instructions are printed on chlo-
rine-free bleached paper.
For this equipment the following acces-
sories are available at specialist dealers.
3
Note:
Illustrations and stock numbers
can be found at the end of these instruc-
tions.
A Adaptor C-connector
1 1/2" internal threads,
pipe nipple 1 1/2" x 300mm
9. Repairs
10. Environmental Protection
11. Available Accessories
EN