Elektro-Automatik PS 800 R Series, Operating Manual

Page: 15 / 28

EN
15
Date: 06-22-2018
Instruction Manual
PS 800 R Series
About
Elektro-Automatik GmbH & Co. KG
Helmholtzstrasse 31-33
41747 Viersen
Germany
Phone: +49 2162 / 37850
Fax: +49 2162 / 16230
Web: www.elektroautomatik.de
Mail: ea1974@elektroautomatik.de
© Elektro-Automatik
Reprint, duplication or partly, wrong use of this ope-
rating guide are prohibited and might be followed by
legal consequences.
Safety instructions
Dangerous voltage
Caution: The output voltage can rise to dangerous
levels (> 60 VDC)!
All live parts have to be covered. All actions at the
output terminals have to be done while the unit is dis-
connected from the mains and may only be executed
by personnel which is instructed about the hazards
of electrical current. Any connection between the
load and the unit (at the output terminals) have to
be scoop-proof. Applications connected to the power
output must be configured and fused in a way that
prevents the use of these to cause a damage to the
unit by overload or malfunction.
Safety instructions
• The cross section of the load leads has to match
the nominal current of the device.
• Avoid any damage to the device, do not insert me-
tal parts through the slots, do not obstruct the slots!
• Mains connection must only be done by trained
technical personnel.
• Mains connection only with appropriate leads and
under adherence of common safety measures.
• Avoid direct sunlight and humidity.
• The DC output must be covered in order to prevent
injury by dangerous voltages!
• Aging of the device, as well heavy use may result
in unpredictable behaviour of control elements like
pushbuttons and trimmers.