© EA Elektro-Automatik in 2022, this information is subject to change without notice
31
06230820_manual_psi_10000_3u_15kw_en_01
Figure 9 - Example for an AC cable with 4 conductors (European color code, cable not included in delivery)
2.3.4.4
Mounting the strain relief
All models in this series have a strain relief for the AC cable in their scope of delivery. It’s recommended to be mounted and
used by the installer, unless a different kind of strain relief is intended. Installation steps:
1.
Remove the two screws from the AC filter box as marked in
Figure 10 below.
2.
Place the bracket and fix it with the included, longer screws (M3x8) and spring/curved washers.
3.
Plug the AC plug and lead the cable in front of the bracket, when seen from behind, and fix it with at least one, better
both of the included cable ties.
The bracket and the cable ties can remain connected all the time. The AC plug has some space to be pulled if required. Should
the device be removed from the installation (cabinet), it’s recommended to only pull the plug and dismount the bracket.
Figure 10 - Mounting position of the bracket
Figure 11
- Fully installed strain relief
