10. Address (For DMX & ID)
DMX Address
Sets up the address for the dmx.
Using the Menu button in the root menu go to DMX
Press Enter to get into DMX and the display will read the current dmx channel.
The display will read for example
DMX:
001
This means the fixture's current address is
1
To change it, use the ↑ or ↓ buttons to get to the correct address. Press Enter to save the address.
Now immediately Enter is pressed, the ID address for the fixture is shown. See below for ID address
information; otherwise press Enter to exit out and back to the Root Menu again.
ID Address
An
elektraLite UV
can be addressed (controlled) through the dmx or instead it can have its own unique
ID address.
There are a total of 255 different ID addresses from 001 to 255.
To set up the address for a fixture, use the Menu button in the root menu go to
ID
Press Enter and then using the ↑ or ↓ buttons,to select the ID address.
Press Enter to save the address.
For the ID address to work you must chose a
Personality
that uses the ID. For example STAG
This allows you to access the ID address system on channel 4.
Set the DMX address to 001 for the fixture. So if ID address 123 is chosen then go to channel 4 on the
lighting board and set the level at 123. You will then be controlling only fixture(s) with ID address 123.
ID address 001 is the default and in ID address 001 all fixtures will be under control.
11. Personalities.
There are three different choices on how the fixture will operate.
What these "Personalities" do in terms of their channel assignments is detailed in the tables on page 7.
To change a Personality use the Menu button to get to
PERS
Press Enter then using the ↑ or ↓ buttons go to the personality required.
Press Enter to save the Personality.
12. Settings.
(Set has several Sub Menus which allow the following functions to be used).
1).
Dimmer
The Dimmer function allows different Dimmer curves to be chosen. There are 5 choices.
Choice 1:- this is Dim off. The Dimmer curve is 0 which means any change in dimmer level is
instantaneous.
Choice 2:- Dim 1. The dimmer curve has the shortest fade in and fade out time.
Choice 3:- Dim 2. The dimmer curve has the 2
nd
shortest fade in and fade out time.
Choice 4:- Dim 3. The dimmer curve has the 3
rd
shortest fade in and fade out time
Choice 5:- Dim 4. The dimmer curve has the longest fade in and the fade out time.
To access the DIM function go through the Root Menu until
DIMMER
is found. Press Enter and then use
the ↑ or ↓ buttons to get to the DIM choice required.
