Elekitsorparts Store Item Name: FAA-450_EU1KY_Antenna Analyzer
Item No.: H10010
Document Type: Manual
8
Picture 9: Main display in measurement mode
In the main screen of Measurement mode, the unit measures the connected antenna, and returns several measured values: R, X,
VSWR, MCL, |Z|, Equivalent L or C, LC Match Parameters, and Smith Chart.
A. Frequency Tuning:
There are 2 ways to change the frequency in this mode, one is to tap the upper part of the screen for tuning the frequency in
10KHz, 100KHz and 500KHz steps, and the other one is to ‘click Set Frequency’ button located on the lower part of the screen
for directly inputting the desired frequency. See the following pictures:
Picture 9: Frequency tuning in measurement mode
If we click the ‘Set frequency..’ button, the unit will show the direct frequency input screen.Tap the numbers on the screen to
input the frequency in KHz, click ‘OK’ to confirm. Click ‘<-’ to delete the last input. Clicking ‘Cancel’ will cancel the input and
return to the measurement screen.
