CAUTION
The equipment must be installed and used in a place whose access and supervision
are specifically controlled by the owner.
Be sure to install the equipment on a stable base and properly level the equipment.
SAFETY INSTRUCTIONS
It is the responibility of the purchaser of ELEIKO products to instruct all users and
supervising personnel on proper usage of the equipment.
1. All included warnings (labels) and instructions
MUST
be read
before the use of any
ELEIKO-equipment. Use each equipment as it is intended for.
2.
A user
MUST
get a medical examination and proper instructions before the use of
any ELEIKO-equipment.
3.
DO NOT
let anyone, under any cuircumstances, use equipment that appears to be
damaged. Do not try to repair any equipment before consulting an ELEIKO technician.
4.
DO NOT
replace the components of ELEIKO-equipment with other non
ELEIKO-
equipment (magnetic safety pin, frames, bars), do not improvise. If there are any
doubts consult an ELEIKO representative prior to any intervention.
5.
DO NOT
overload the equipment and
DO NOT
try to exceed personal strength
levels.
6.
Children and teenagers must be supervised by a knowledgeable adult.
7.
DO NOT
remove any safety labels from the ELEIKO-equipment. ELEIKO is not
responsible if a label is removed. Replace damaged labels immediately.
PREVENTITIVE MAINTENANCE & INSPECTIONS
Regularly:
Clean the surfaces on frames and tubes from dust and dirt. Vaccum clean rubber tiles.
Check that all bolts between parts and floors are properly tightened, according to
recommendations.
WARRANTY
Tubings and corners: 3 years
Foam, wooden deck, rubber tiles: 1 year
Normal wear and tear does not fall under the warranty.
ADDITIONAL INFORMATION
This equipment is for indoor use only.
READ BEFORE INSTALLATION AND USE
Summary of Contents for SVR Platform Retrofit Large
