Transition Layer Count:
The count of transition layers after the bottom layer to make it stickier
between layers. Except for the exposure time, the other parameters of the transition layer are
the same as the normal layer; the default setting is 5.
Transition Type：
The transition type of the exposure time when transitioning from the bottom
layer to the normal layer. The default setting is linear transition.
Static Time Before Lifting：
The time difference between the end of the printing exposure and the
beginning of the build platform away from the exposed surface; the default setting is 0.5 seconds.
Static Time After Lifting:
The time difference between the build platform starting to standstill and
starting to return after the build platform is lifted; the default setting is 0 seconds.
Static Time After Return:
The time difference between the build platform starting to standstill and
starting to exposure after the build platform moves to the printing surface;
the default setting is 0 seconds.
Bottom Lift Distance:
During the bottom printing process, the distance when the build platform
away from the printing surface each time; the default setting is 3+4mm.
Lifting Distance:
In the normal printing process, the distance when the build platform away from
the printing surface each time; the default setting is 3+4mm.
Bottom Retract Distance:
During the bottom printing process, the retract distance of the build
platform, do not change it if not necessary; the default setting is 5.5+1.5mm.
Retract Distance:
In the normal layer printing process, the retract distance of the build platform,
do not change it if not necessary; the default setting is 5.5+1.5mm.
Bottom Lift Speed:
During the bottom printing process, the movement speed of the build platform
away from the printing surface each time; the default setting is 70&300mm/min.
Lift Speed:
In the normal printing process, the movement speed of the build platform away from
the printing surface each time; the default setting is 70&300mm/min.
Bottom Retract Speed:
During the bottom printing process, the movement speed of the build
platform close to the photocuring surface; the default setting is 300&70mm/min.
Retract Speed:
In the normal layer printing process, the movement speed of the build platform
close to the photocuring surface; the default setting is 300&70mm/min.
