MANUAL CODE: XXXXX
PROFESSIONAL SOUS COOKER
ISSUE DATE: 15/01/2018 vers_00_05
Rev. 00.00 WITH REFERENCE TO FIRMWARE VERSION :00_15 and more
ELE
GEN
by Quaglia Luigi - Via Jmre Nagy 8-8/A 42019 - Scandiano Reggio Emilia Italy- VAT No. 02018620357
TEL.+390522859721 – FAX +390522767677 -
VOIP Skype. eleg2002
- Web-www.elegen.it - email
Page 5 of 16
2.3 LESSER HAZARDS
Keep out of reach of children. The machine is not suitable for use by children or adolescents.
2.4 BURN HAZARD
Do not touch the heating part during the cycle, there is danger of burns.
2.5 CORROSIVE HAZARD
Clean the machine with products suitable for material used for its construction. Do not use acids or aggressive substances which
may damage the machine structure and cause damage to persons or property. Do not use alcohol-based products
2.6 ELECTRICAL HAZARD
Before powering up the machine, check that everything is in accordance with the use made of it. Verify that any safety protections
are efficient and that, in the country of machine use, the outlet complies with the plug mounted on the machine and complies with
voltage, frequency and outlet power, with respect to reported data contained on the machine identification label. The machine can
be connected to the mains supply only after these checks have been performed. Failure to comply with these requirements will void
the guarantee.
Electrical connection of the machine to the mains is allowed only by qualified personnel. Regularly check the electrical machine
parts to verify conditions. In the event of any scratching, crushing, abrasions or burning of the network cable or other electrical
conductor, immediately unplug the machine from the mains and call for service. Do not use the machine until the problem has been
resolved. If the operation is considered too dangerous, immediately contact an electrician or technical assistance. Do not operate
the machine; damaged electrical equipment should be replaced immediately by qualified personnel.
There are some openings ventilation along the perimeter of the machine. Never place objects into the slits as this causes a risk of
electric shock. Do not wash the machine with steam, running water or water jets, which are prohibited in the perimeter of machine
use, risk of electric shock. When cleaning the machine, disconnect the machine from the mains.
Do not touch metal machine parts with damp or wet hands. Do not pull the power cable to disconnect it from the mains
Verify that the machine is connected to the electrical outlet and that the outlet is connected to grounding as required by applicable
law. The machine must never be used without grounding for any reason. The manufacturer cannot be held responsible for any
damage to persons or property due to lack of connection to grounding of the electrical system..
Keep the mains cable installed on the machine away from heat sources as they may melt, becoming irreparably damaged.
In the event that the machine becomes inoperative with serious malfunctions or exposed electrical parts, with danger to persons or
property, notify receiving personnel to make the machine harmless. Use a sign to clearly mark the problem and hazard of with
machine operation run without repair.
2.7 USER OBLIGATIONS
This document is considered an integral part of the equipment that you have purchased and as such should be treated and kept for
the lifetime of the product. In the event of sales of the product, this document must be provided to the new owner.
The buyer must read and have all operators making use of the machine read this document. Its consultation must be permitted
whenever necessary.
Not complying with the instructions in this manual may impair the proper functioning of the system and can severely damage the
equipment, effectively reducing its operating life. The incorrect installation of equipment can cause severe and permanent damage
to persons and/or property. Incorrect installation can also cause electrocution to operators.
Failure to comply with these requirements will void the guarantee.
It is important to read the instructions in this manual carefully before installing and powering the equipment. All operations must
be restricted to specialised personnel who understand the risks and danger that can result from improper installation, by not
respecting the rules and non-compliance with the instructions in this manual. It is also important to make the correct connections
in order to prevent malfunctions caused by electrostatic discharges or false contacts. Lack of knowledge of the information
contained in the machine manual limits the use and full performance operation of the machine.
4
The machine manual must be kept near the machine and always available to personnel for any necessary consultations. The
manufacturer allows the buyer to keep a copy of this manual for internal use only within the buyer's factory, to prevent degradation
