Installation Instructions
11
/
12
www.elecycles.com
6.4
Sensor calibration
The system shall be calibrated for the first time installation, after then no
need to calibrated.
A)830 and 850 meters switch to P09 interface, and M3 and S700 meters
switch to P19 interface
830 and 850 meters
M3 and S700 meters
B)
press the "+" key to set the value to "1" (calibration mode), then turn the
chainwheel forward for 5-10 laps, the motor shall have the power output in
PAS level 1-5;
830 and 850 meters M3 and S700 meters
C)
Repeat step A), set value to 0, exit calibration mode
