3. Assembling / Installation
WARNING
•
For safety reason, please use only the
same size of fixing or mounting screw
which are recommended in this
instruction manual.
•
Please use plugs appropriated to your
type of wall on which you want to
install the hood (refer to the
instructions of the plug manufacturer).
3.1. Installing the one-way valve.
Install the one-way flaps (
Fig.3.2
) in the exhaust hole (
Fig.3.1
) by
placing the ends in the holes (
Fig.3.3
).
3.2. Installation
If you have an outlet to the outside, your cooker hood can be
connected as on
Fig.4
. Use a flexible aluminum or plastic non-
flammable exhaust pipe suitable for cooker hood with a diameter of
150 mm.
•
The cooker hood should be placed at a distance of 65~75cm above
the cooking surface for best effect (
Fig.6
).
•
Once the height is set, install the hook (
Fig.7.2
) at the wall, using
appropriated plugs to your type of wall. We suggest a diameter from
6 to 8 mm. Refer to the instructions of the plug manufacturer in order
to use the correct screws.
•
Place the exhaust pipe on the hood (
Fig.8.1 & 8.2
).
•
Fix it, using a cable tie (
Fig.9
)
•
Install the outside chimney bracket (
Fig.10.2
) on the outside chimney
(
Fig.10.3
) and ensure the inside chimney (
Fig.10.1
) slides smoothly.
•
Put the hood on the hook (
Fig.11.2
).
•
Put the chimney in position (
Fig.12
).
•
Adjust the inside chimney and mark the position. Install the bracket
(
Fig.7.1
) on the marked position, then fix the inside chimney on the
bracket (
Fig.13
)
NOTE:
if needed, longer chimney is available in option.
