OPERATION
Plug the power supply into a 13 Amp mains socket. If
connecting via an extension lead, make sure that the lead is
rated at 3 Amps or more, and that it is fully unwound. Plug
the lead from the power supply into the aerial unit.
Switch on at the mains socket.
PRODUCT SAFETY
•
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
•
Children should be supervised to ensure that they do not
play with the appliance
•
Do not use in bathrooms, or in wet or damp locations.
•
Do not use outdoors.
•
Do not place the lead beneath a carpet or rug.
•
Do not allow the cable to hang over the edge of a table.
•
Arrange the cable so that it cannot cause a trip hazard.
GENERAL SAFETY REQUIREMENTS
Domestic wiring must be tested periodically by a qualified
electrician at least once every 10 years or at every change of
occupancy.
For office and retail premises, and buildings such as village
halls, the wiring must be inspected at least once every 5
years.
It is recommended that all building be fitted with smoke
alarms (it is mandatory for new buildings).
PAT TESTING.
When used in an office environment, this product must be
safety-tested yearly by a qualified electrician (PAT Tested) in
order to comply with the Electricity at Work Regulations.
We recommend that it is PAT tested regularly when used in a
domestic environment.
Page 3
