background image

 

THE MUNRO AW400TG ANAEROBIC WORKSTATION SPECIAL FEATURES 

 

 

Many special  features  have  been  designed  into  the  MUNRO Anaerobic  Workstation  that cannot be 

found on any  other  cabinet. All these have been built in for safety, economy of operation and to make it 

easier and more comfortable for the operator to use. 

 

 

MINIMUM BENCH AREA 

 

 

Although the cabinet will incubate 400 dishes there is still ample room within the unit for the operator to 

manipulate the cultures. 

 

 

OPERATOR COMFORT 

 

 

Quite often the operator has to spend long periods of time working with their arms inside the unit and for 

this reason the cabinet has been designed so that the operator can work sitting down thereby minimising 

fatigue. The openings of the glove ports are large, facilitating easy movement of the arms. The viewing 

area is large, unobstructed by bends in the material which cause the operator to be constantly moving 

their position. The doors are easily sealed by first closing, then turning the tightening knob. If the unit fails 

to function because one of the doors has been left open or perhaps a gas bottle has run out of gas then 

this is indicated clearly on the Control Panel. The unique bare hand working facility allows the operator to 

get their hands in and out of the cabinet without any fuss.  In fact the cabinet has been designed to be 

very user friendly. 

 

 

 

SINGLE PLATE ENTRY LOCK 

 

 

This lock is used when only a small number of dishes need placing in the incubator. It saves both time and 

gas. The front door is opened by unscrewing the hinge pin and the dish is placed in the cabinet by pushing 

it with the bar provided. The dish lid travels up a ramp allowing the escaping gas from the cabinet to flush 

the air out of the dish before the lid is replaced by the back door. Once the dish is in the incubator the 

outer door is re-closed by tightening the screw. 

 

 

 

CHECKING THE INCUBATOR ATMOSPHERE FOR OXYGEN 

 

 

The Anaerobic Indicator Solution will indicate traces of Oxygen in the incubator atmosphere by changing 

colour from being clear when the atmosphere is anaerobic to being blue when oxygen is present. The 

Indicator Solution is held in a small bottle located at the front of the incubator in the top right hand corner 

and held in position by a plastic spring clip. The atmosphere from the cabinet is bubbled through the 

solution by a small aquatic pump. The pump is plugged permanently into an electrical socket and the 

switch should be left in the "ON" position. The atmosphere of the incubator can be checked for oxygen 

content by simply switching the socket "ON" on the Control Panel. It is usually sufficient to check the 

atmosphere perhaps once a day allowing the pump to run 

for about 1 minute. 

 

Summary of Contents for AW400TG TWO GAS





















Reviews: