background image

Warranty

22

22

U.S. and Foreign Patents Pending

ELECTROSEA, LLC 

 

Things Not Covered: 

This Limited Warranty does not cover:

1. 

A failure of the Product that results from 

(a)

 improper installation of the Product, 

(b)

 a failure to follow instructions for use of the Product,  

(c)

 jamming or clogging the Product with foreign matter, 

(d)

 use of chemicals or other substances not specified by ElectroSea for use in or  

with the Product, 

(e)

 abuse, misuse, or mishandling of the Product, 

(f)

 repair or modification of the Product by someone other than ElectroSea,  

or 

(g)

 damage to the Product, however caused;

2. 

Costs of service to remove the Product for return to ElectroSea or install a repaired or replacement Product;

3. 

Damage to the Product while in transit to or from ElectroSea; or

4. 

Damage to the vessel in which the Product is installed or any of its equipment, components, systems, fittings, air conditioners, chillers, wells, 
pumps, freezers, conduits or pipework.

How to Make a Claim: 

Call ElectroSea toll free at (888) 384-888. 

You must make your claim during the Warranty Period and within 30 days 

after you first discovered the defect that is the subject of your claim.

 You will need a receipt (or similar document) that shows that you are 

the Original Purchaser and are within the Warranty Period. You will also need the Product’s serial number, the type and length of vessel on which 
the Product is used, and a reasonably complete description of the problem you are having. ElectroSea may require that you send the Product to 
ElectroSea, at your cost, for examination. If your claim is covered by this Limited Warranty, ElectroSea will pay the cost of sending the Product  
(as repaired) or a replacement Product to you.

No Other Express Warranties: 

This Limited Warranty is the only express warranty that applies to the Product. ElectroSea has not given anyone the 

right to make any warranty or promise of any kind relating to ElectroSea or the Product, so if someone other than ElectroSea makes a warranty or 
promise relating to ElectroSea or the Product, that warranty or promise is not binding on ElectroSea. 

Limitation of Damages: 

In no event or circumstance will ElectroSea be liable to anyone for any punitive, special, incidental, indirect or 

consequential damages that relate in any way to the Product, even if ElectroSea has been advised of the possibility of those damages. 
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion may not apply to you.

Product Changes: 

ElectroSea may change the Product, the materials used in the Product, or the manner in which the Product is made from time 

to time, but will not have an obligation to incorporate any of those changes into previously manufactured Products or provide notice of any of those 
changes to purchasers of previously manufactured Products.

Summary of Contents for CLEARLINE CL-2000-X2.0

























Reviews: