RFID Mode:
You can use the optional available antenna when you connect the antenna to the 4 pin connector and
activate
the option 4 in the table. Then you just need to „teach“ the B -Box the unique code of the 2 electronic keys. The procedure is
almost similar to the procedure ofthe other options: Just press the „Left“ or „Right“ button and switch on the ignition. The box
„learn“ the code of the key when you hold it in front of the antenna. A flash of the direction indicators indicate that the box
have learned the code. Now just feel free to repeat the procedure with the other key and the other direction button. By the
way, don´t install the antenna behind any metal. This will reduce the maximum distance to the key or it will not work correct.
Bluetooth Module:
If you don´t use the RFID socket you can connect an optional available Bluetooth module on
the port.
Just feel free to scan the QR code and download the Android app from our website:
Plug in the module to the 4 pin connector and switch on the ignition. Activate the Bluetooth option in your smart phone and
connect it to B-Box Remote. Open the app, scan for Buetooth devices and connect it with B-BoxRemote. That´s it. Now you
can control your bike via a touch on your smartphone. Please take care that the Bluetooth module is not covered with metal.
This will reduce the maximum distance to your smartphone. Also take care that the neutral switch is connected to your B-Box.
This will prevent you for unwanted funny effects when you try to start your bike and the gearbox is not in neutral position.
Installation:
Connect the red cable to plus 12 Volt and the black cable to the minus pole of the battery.
You can connect the plus
cable
direct to the battery if you use the RFID antenna.The red cable should be connected after the ignition switch if you
don´t use the RFID antenna.
The wires from the handle bar switches to the B-Box can be as thin as
possible. There is no
significant current through these cables. The cables to the loads should have a minimum size of 0,75 qmm. Please take care
that the wires to the handlebar switches are as far as possible away wired from the ignition cables. It is always a good idea to
use a 6 wire shielded cable to the handlebar switches. These cables are available in every local computershop.
The B - Box should be installed by professional well trained engineers only. Please check your local regulations regarding the
traffic light rules in your country before of the use of the B - Box in your bike. Please be aware that we are not responsible for
any hazards, damages or disadvantages due to the use of the electronicbox. The electronicbox devices are registered under
the number DE54933725 WEEE as B2C device. We also declare that the B - Box is conform to the CE and ROHS regulations
for the European market.
We tried to keep the functions of the B - Box and this manual as simple as possible. If you have any questions while the
installation please don’t hesitate to contact us at info@
elektronikbox.de .
We wish you to have a lot of fun with your new B - Box in your bike
and of course always a safely trip!
3 / 3
