Electronics SP44, Manual

Page: 3 / 16

2. Usage
3
Manual SP-44
This device is designed to automatically manage the cauldron, turn on the
pumps: the circulation pump, water pump, and floor heating pump, within the
central heating installation. The controller cooperates with the auger of the
cauldron. The control process is managed by the control of the liquid
temperature inside the central heating cauldron.
The controller has two modes:
1. Operational mode (air temperature is lower than the temperature set).
2. Maintenance mode (air temperature is greater than the temperature set).
The controller allows keeping the temperature set at the hot air outlet.
3.Controller handling
In order to turn on the controller you need to press the ENTER button.
After turning it on you will see its main page on the display, which shows the
following data:
Achieved and pre-set central
heating temperature
Achieved and pre-set temperature
of the Hot Water Storage Tank
The ENTER button - turn the device on, enter menu, accept change.
The EXIT button - preview of the cauldron operational state, exit without
saving.
O O
C.H. 22 C SET 55 C
O O
H.W.T.S 22 C SET 45 C