Electronics SP44, Manual, Page: 11 / 16

11
Manual SP-44
5. Usage
1. Connect power supply to C.H. and H.W.S.T. pums as well as to the floor
heating pump:
a. to „grounding” clamp the green-yelow,
b. to „N” clamp the blue wire,
c. to „L” clamp the brown wire
2. After connecting controller to the mains and connecting pumps the
controller is ready to work. We need to remember that the controller is
provided with the default settings, and that we need to adjust it to our
needs.
3. Technical condition of the controller should be checked periodically.
After performing all the above mentioned activities the
controller provides:
1. Sustaining constant temperature of the central heating cauldron set by
the user by automatic fuel supply and turning on the blow in to the
hearth.
2. Automatic turning on of the central heating, floor heating and hot water
tank storage pumps.
3. Automatic blower switch off as well as the pumps and the conveyer once
all the fuel from this bin is used.
4. Constant temperature readings.
6. Error messages
Error 0 - Device malfunction
Error 1 - EEPROM memory malfunction
Error 2 - Central Heating sensor malfunction
Error 3 - Hot water storage tank sensor malfunction
Error 4 - Helix sensor malfunction
Error 5 - Floor heating pump malfunction
Error 6 - Central Heating temperature too high
Error 7 - Helix temperature too high
Error 8 - Hot water tank storage temperature too high
Error 9 - No fuel