background image

14   

Electronics   Inc.   •      (574)   256-­‐5001   •   www.electronics-­‐inc.com

   

   

Limited   Warranty   

AC-­‐24   Controller   

   

The   warranty   obligations   of   Electronics   Inc.   for   this   product   are   limited   to   the   terms   set   forth   below.   
   

Length   of   Warranty   Period   

This   limited   warranty   lasts   one   (1)   year   from   the   shipping   date   of   this   product.   

   

What   is   Covered   

This   limited   warranty   covers   defects   in   materials   and   workmanship   in   this   product.   

   

What   is   Not   Covered   

This    limited    warranty    does    not    cover    any    damage,    deterioration    or    malfunction    resulting    from    any    alteration,   
modification,   improper   or   unreasonable   use   or   maintenance,   misuse,   abuse,   accident,   neglect,   exposure   to   excess   
moisture,    fire,    improper    packing    and    shipping    (such    claims    must    be    presented    to    the    carrier),    lightning,    power   
surges,    or    other    acts    of    nature.    This    limited    warranty    does    not    cover    any    damage,    deterioration    or    malfunction   
resulting   from   the   installation   or   removal   of   this   product   from   any   installation,   any   unauthorized   tampering   with   
this   product,   any   repairs   attempted   by   anyone   unauthorized   by   Electronics   Inc.   to   make   such   repairs,   or   any   other   
cause    which    does    not    relate    directly    to    a    defect    in    materials    and/or    workmanship    of    this    product.    This    limited   
warranty   does   not   cover   equipment   enclosures,   cables   or   accessories   used   in   conjunction   with   this   product.      

   

How   to   Obtain   a   Remedy   Under   this   Limited   Warranty   

To   obtain   a   remedy   under   this   limited   warranty,   contact   Electronics   Incorporated   by   letter,   email,   fax   or   telephone   
with   the   following   information:   
•   Product   name   and   model   
•   Product   serial   number   
•   Original   shipping   date   (see   label   on   product)   
•   Company   name   and   location   
•   Name   of   contact   person   for   description   of   symptoms   
•   Return   shipping   address   and   any   special   instructions   
   
If   it   is   determined   that   the   product   must   be   returned   under   this   limited   warranty,   a   Returned   Goods   (RG)   number,   
obtained    from    Electronics    Inc.,    will    be    required.    This    product    should    be    properly    packed    to    prevent    damage    in   
transit.    Cartons    not    bearing    a    RG    number    will    require    additional    processing    time    and    repair    service    may    be   
delayed.   
   

What   Electronics   Inc.   Will   Do   Under   This   Limited   Warranty   

Electronics   Inc.   will,   at   its   sole   discretion,   provide   one   of   the   following   remedies   to   whatever   extent   it   shall   deem   
necessary   to   satisfy   a   proper   claim   under   this   limited   warranty:      
   
1.)    Elect    to    repair    or    facilitate    the    repair    of    any    defective    parts    within    a    reasonable    period    of    time,    free    of    any   
charge   for   the   necessary   parts   and   labor   to   complete   the   repair   and   restore   this   product   to   its   proper   operating   
condition.   Electronics   Inc.   will   pay   the   shipping   costs   necessary   to   return   this   product   once   the   repair   is   complete.      
   

Summary of Contents for MagnaValve AC-24
















Reviews: