STEP 4:
A: Connect the Sensor wire (24) well with Extension wire (35).
B: And then fix the Handlebar post (16) to the front post of Main frame (1) with Pop pin knob (14) after
adjusting to the suitable position.
C: Finally attach the Handlebar (18) and Meter bracket (34) to the Handlebar post (16) using Allen bolt (22),
Spring washer (20) and Flat washer (19).
STEP 5:
Insert the Meter (23) into the Meter bracket (34) and then insert the round end of the Extension wire (35)
into the hole on the back of Meter (23).
Summary of Contents for 10006713
Page 1: ...Spinning Bike 10006713 ...
