6
7)
Port MIDI Out to connect an external Synth generator;
8)
USB connector to connect M-Blaster to a PC;
9)
Power Switch;
10)
Connection to the supplied external power supply adapter;
POWER SUPPLY
Connect the adapter plug (male) to the PWR IN female connector
positioned on the M-Blaster back panel
(Fig.2/10)
.
Finally, connect the adapter plug to the main socket.
IMPORTANT
Please use exclusively the supplied adapter. Otherwise, the
equipment can be damaged.
AUDIO CONNECTIONS
Connect the M-Blaster Audio Outputs (fig 2/4) to your audio equipment
(mixer line input or directly to the line inputs of an audio equipment,
inputs AUX or TAPE of your home Hi-Fi or else).
Note: in order not to damage the audio equipment it is strongly
recommended that M-Blaster is turned on before the amplification set-up.
HOW TO START
M-Blaster is supplied with a software E-link for the Personal Computer
that allows the MIDI and MP3 file transfer directly from the PC to the M-
Blaster data storage unit (Compact Flash Card) and moreover can be
used for backup operations.
First of all install the supplied software on the Personal Computer and,
successively, connect M-Blaster through a standard USB cable A/B
(such as the one used for USB printers ) to a properly functioning USB
port on the PC.
