18
The upper bar reports the name of the instrument assigned to the MIDI
channel where the slider key is positioned and the value of the parameter
in use, visualized as a variation (-/+) set by the user for that channel.
NOTE: on channel 10 the transpose is only possible in “CHANNEL”
mode
The usable function keys in the TRACK CHANGE page are the same
ones of the previous operative systems RESTORE, SAVE, RELOAD,
MUTE with the addiction of a new one that changes its use depending on
the parameter it is working with.
More precisely:
“MUTE”: visualized when working on the volume parameter. Pushing the
function key it changes the track on which the slider key is positioned.
“SOLO”: Visualized for all the other parameters. Pushing this function
key, as already said, it will be possible to hear only the channel on which
the slider key is positioned in that moment.
NOTE:
1.
The MUTE values set for the various channels are saved
through SAVE, on the Compact Flash in a chart paired to the
song. The saving is not done for the SOLO values that have
been modified;
2.
Differently to other parameters (that act in a additive way,
summing to the preset parameters memorized in every song)
the parameter TEMPO acts as a multiplying coefficient on the
time setup of each song. Experiment the effect of the setups
of the TEMPO parameter on songs that have TEMPO
variations using the Master Track.
PARAMETERS FOR MP3 FILES
To be able to adjust the usable parameters on a audio file (MP3) it is
necessary to select the function TRKCHANG.
As described above the function is accessible from the main page
SONGS through the function key TRKCHANG, it is visualized only after
the song has started: Once activated the function TRKCHANG the
function keys have assigned the following uses:
