![Electronic Sound Solutions M-Blaster User Manual Download Page 13](http://html.mh-extra.com/html/electronic-sound-solutions/m-blaster/m-blaster_user-manual_2385825013.webp)
13
If during the song playback the STOP button is pushed, the song is
interrupted. At this point it is possible to use the function key CONTINUE
(to restart the song playback from the point where it was halted) or push
the PLAY button again to restart the song from the beginning.
NOTES:
The song that is playing is always the one underlined with the slider key.
If during a song another one is underlined and the PLAY button is used,
the playback will be halted and the new song will start immediately.
If a song is interrupted with the STOP button see the following:
After having halted a song with the STOP button and underlined another
one, using the PLAY button the new song will start playing from the
beginning, using the CONTINUE function the first song will resume
playing (from the point where it was halted)
PARAM. (Parameters)
Press the button PARAM, also during the playback of a song, to access
the “Parameters” page where it will be possible to adjust the MIDI and
Audio parameters in real time (during playback).
From left, the function keys permit the selection of the page relating to:
1.
MIDI
, where is possible to find the following regulations:
•
MIDI TRANSPOSE: to adjust the global transposition (of all the
MIDI files). The value can be varied of +/- 12 semitones before or
during the song playback.
This parameter will be active until the equipment is turned off.
•
MIDI VOLUME: to adjust the quantity of volume only for the midi
files. You should put this parameter on level 0, if you want to use
MBlaster2 with an external expander, maintaining the audio
functionalities (microphone, MP3).
•
MIDI REVERB: to adjust the global quantity of the reverberation
effect on the MIDI songs; this parameter is saved.
•
MUTE TRACK: to choose the intervention channel of the function
key TRKON/OFF. The factory preset value is 4, a MIDI channel to
which is usually assigned the melody track; this parameter is
saved.