Electron MASTERTEMP, Instruction Manual

Page: 23 / 80

MONITOR DIGITAL TEMPERATURE - MASTERTEMP
20
SERIAL COMMUNICATION MASTERTEMP
Protocol: MODBUS RTU or DNP 3 L2
Baud rate: 2400 a 57.600 (Auto Baud Rate)
Data Bits: 8
Parity: None / Even / Odd
Stop Bits: 1
Variable Type: Holding Registers (40.000)
Modbus
Address DNP
Address
Readout Range
Bits
Index
State
Description
Point Name Write
Read
Scale
2 2 -50.0 – 250.0 - - Oil Temperature Alarm W/R -1000:10
3 3 -50.0 – 250.0 - - Winding 1 Temperature Alarm W/R -1000:10
4 4 -50.0 – 250.0 - - Winding 2 Temperature Alarm W/R -1000:10
5 5 -50.0 – 250.0 - - Winding 3 Temperature Alarm W/R -1000:10
6 6 0 - 1
- Register – shutdown due load -
0
0 For 0, shutdown due load OFF
W/R -
1 For 1, shudown due load ON
7 7 -50.0 – 250.0 - - Oil Temperature Shutdown W/R -1000:10
8 8 -50.0 – 250.0 - - Winding 1 Temperature Shutdown W/R -1000:10
9 9 -50.0 – 250.0 - - Winding 2 Temperature Shutdown W/R -1000:10
10 10 -50.0 – 250.0 - - Winding 3 Temperature Shutdown W/R -1000:10
11 11 0 - 3
- Register – Cooling TypeRegistro
W/R -
-
1 Cooling Actuation due Temperature
3 Cooling Actuation due Temperature and Load
12 12 -50.0 – 250.0 - - Oil Temperature to 1st Cooling Group Actuation W/R -1000:10
13 13 -50.0 – 250.0 - - Winding 1 Temperature to 1st Cooling Group Actuation W/R -1000:10
14 14 -50.0 – 250.0 - - Winding 2 Temperature to 1st Cooling Group Actuation W/R -1000:10
15 15 -50.0 – 250.0 - - Winding 3 Temperature to 1st Cooling Group Actuation W/R -1000:10
17 17 -50.0 – 250.0 - - Oil Temperature to 2nd Cooling Group Actuation W/R -1000:10
18 18 -50.0 – 250.0 - - Winding 1 Temperature to 2nd Cooling Group Actuation W/R -1000:10
19 19 -50.0 – 250.0 - - Winding 2 Temperature to 2nd Cooling Group Actuation W/R -1000:10
20 20 -50.0 – 250.0 - - Winding 3 Temperature to 2nd Cooling Group Actuation W/R -1000:10
21 21 0-100 - - Hysteresis for Alarm Deactivation W/R -1000:10
22 22 0-100 - - Hysteresis for Cooling Deactivation W/R -1000:10
23 23 0-20 - - Shutdown Delay (minutes) W/R 1:1