Electrolux Z4640 SERIES, Owner'S Manual

Page: 14 / 20

14
To remove Rinsable Micron Filter from
filter frame .
1. Push down latch and pull filter frame back.
2. Then lift filter up and out of filter frame.
To replace Rinsable Micron Filter into
filter frame .
1. Place new filter in filter frame. Place bottom tabs of filter
frame into slots.
2. Rotate filter frame toward cleaner.
3. Push upward on the latch to secure into place.
Rinsable Micron Filters in Filter Frame
(Only for models with Micron filter frame)
Check the Micron filter each time the dust cup is emptied.
Filter
Filter
Frame
Exhaust
Filter
Door
Rinsable Micron Exhaust Filters
(Only for models with the exhaust filter door)
Check the micron exhaust filter each time the dust cup
is emptied.
To Replace Rinsable Micron Exhaust Filter
1. Lower the handle. Open exhaust filter door; push toward
the left side.
2. Grasp filter and pull out.
3. Push new filter into cleaner, smooth side facing out .
4. Close exhaust filter door; push toward right side.
2
3
Micron
Filter
Rinsing Directions for Rinsable Filters -
Filter can be rinsed up to 6 times. Replace after 6 rinsings to
retain filtration level performance from your vacuum.
1. Remove soiled filter from cleaner.
2. Examine filter on both sides.
3. Gently rinse both sides of the filter with warm tap water to remove surface dirt.
DO NOT COMPLETELY SOAK FILTER . DO
NOT USE SOAP OR DETERGENT.
4. Let the filter dry for at least 12-24 hours.
FILTER MUST BE 100% DRY FOR PROPER PERFORMANCE
.
DO NOT OPERATE
VACUUM WITH WET OR DAMP FILTER
.
5. Replace filter in vacuum cleaner.
Exhaust Filter
Door
Filter Frame plus
filter (depending
on your vacuum
model)