background image

4

DO NOT OIL the motor at any time. The bearings are permanently
lubricated and sealed.

Rating Plate

The model, type, and serial numbers are
indicated on the rating plate located on the back
side of the cleaner. For prompt and complete
service information, always refer to these
numbers when inquiring about service.

Model & Type No. _________________

Serial No. ________________________

ELECTROLUX

MODEL               TYPE               SERIAL NO.

VOLTS                    WATTS                     HERTZ

SERVICE

Should you require service on your Electrolux cleaner, please telephone 08706 055055.
Before requesting service, please check whether your problem is covered under Service
Checklist (see below).

SERVICE CHECKLIST

If your cleaner will not operate, check the plug connection, plug fuse and mains fuse.

Never allow the filter to become so clogged that it impedes the air-flow, thus reducing
the cleaning efficiency of the machine. The character of household dust and its effect
on the air-flow through the machine may vary considerably. Fluffy dust allows air to
pass through readily whereas fine powdery dust or proprietary cleaning powders,
pack tightly in the filter, offering greater resistance to air-flow and will reduce cleaning
efficiency if the filter becomes overloaded. Always ensure that you have a spare
genuine Electrolux filter.

Always store your cleaner and spare filters in a dry place.

To maintain high performance of your vacuum cleaner, wash the filter once a month
or more if required.

Never pick up hot cinders or lighted cigarette ends.

Make certain that your cleaner does not come into contact with water or any
other liquid. It is not designed as a wet pick up cleaner, and must never be
used on damp carpets or wet floors.

Important – in the event of the mains supply cable of this vacuum cleaner requiring
replacement, we recommend that this be carried out by a Electrolux Service Agent.

Spares

New filters can be obtained from Authorised Electrolux Dealers and electrical retailers. If
difficulty is experienced in obtaining spares please call us on 08706  055055.

Summary of Contents for Z410 Series













Reviews: