Electrolux WP4 1100H, Installation Manual

Page: 62 / 72

62
Installation manual
Caution
In case of a machine with integrated weighing, you must use a flexible power supply cable to connect the
machine.
Machine
type
Heating Supply Voltage
Rated Power
Rated Intensity
Connection cable
section
Protection
700
Electric 380/415 V 3+E ~ 50/60 Hz 65.7 kW 100.5 A 4 x 35 mm² 3 x 125 A
Electric/Steam 480V 3+E ~ 50/60 Hz 67.7 kW 80 A
4 x 35 mm² / AWG
2
3 x 100 A
Steam 380/415 V 3+E ~ 50/60 Hz 11.7 kW 27 A 4 x 10 mm² 3 x 32 A
900
Electric 380/415 V 3+E ~ 50/60 Hz 87.7kW 135 A 4 x 35 mm² 3 x 160 A
Electric/Steam 480V 3+E ~ 50/60 Hz 87.7 kW 105 A
4 x 50 mm² / AWG
2
3 x 125 A
Steam 380/415 V 3+E ~ 50/60 Hz 15.7 kW 33 A 4 x 10 mm² 3 x 40 A
1100
Electric 380/415 V 3+E ~ 50/60 Hz 91 kW 140 A 4 x 50 mm² 3 x 160 A
Electric/Steam 480V 3+E ~ 50/60 Hz 91 kW 110 A
4 x 50 mm² / AWG
2
3 x 125 A
Steam 380/415 V 3+E ~ 50/60 Hz 19 kW 42 A 4 x 10 mm² 3 x 50 A
21 Compressed air connection
The customer should arrange the installation of filter device, as well as a pressure regulator (manometer) on the ma-
chine's compressed air supply.
Caution
The machine must be supplied with dried and perfectly filtered compressed air.
The manual stopping valve lockable in closed position (provided by customer) should be installed on the machine's
compressed air supply.
The supply pipe should accept a pressure of at least 1 Mpa (10 bar) (145 psi).
• Connection diameter: rapid action hose coupling DN 6 (0.24") for hose Ø 6/8 mm.
• Advised pressure: 550-700 kPa (5,5-7 bar) (80-102 psi).
• Minimum pressure: 550 kPa (5,5 bar) (80 psi).
• Maximum pressure: 700 kPa (7 bar) (102 psi).
• Consumption 50 l/h.
Important
To avoid too big head losses, the compressed air supply pipe should be bigger in diameter than the coupling di-
ameter (DN 8 for example); in this case, put a 6/8-8/10 adapter.