manualshive.com logo in svg

Electrolux Washing machines, Service Manual

Share
Download
Electrolux Washing machines Service Manual Download Page 19

SOI/DT 2005-01 dmm 

19/67 

599 36 82-57 

9.3.17 Spin 

speed 

adjustment 

ª

  The speed of all spin phases in the cycle is lowered 

ª

  The last selected position can be used for no spin and stop with water in the drum 

ª

  No spin adds three rinses to the COTTON cycle and one rinse to the SYNTHETICS cycle. 

 

9.3.18  Time reduction (Quick) 

ª

  Modifies the structure of the COTTON - SYNTHETICS– DELICATES programmes to obtain washing 

time very short (optimization for small or lightly-soiled loads). 

ª

  Reduces the no. of rinses (one rinse less). 

ª

  Increases the water level of the other two rinses. 

ª

  Corresponds to the SHORT- VERY SHORT cycles on the basis of the configuration of the appliance. 

 

9.3.19 Temperature adjustment 

ª

  Used to select the washing temperature compatibly with the limit temperature for the cycle. 

ª

  Can be used during the cycle selection phase: the temperature can be modified only if the heating 

phase has not started (in pause mode). 

 

9.3.20  Exclude buzzer  

ª

  The buzzer can be deactivated by pressing a combination of two buttons simultaneously for 5 seconds. 

This option depends on the configuration; as a result, the buttons may vary according to the model. 

ª

  If the buzzer is deactivated, the appliance will emit no acoustic signal during selection or at the end of 

the cycle; however, the alarm signalling system remains operative. 

Summary of Contents for Washing machines




































































Reviews:

No comments

Brands by name

Popular brands

Load more brands