Installation
2
Conversion instructions - T4290 only:
1. Disconnect the power to the dryer.
2. Open the operating panel.
. Remove nozzle (1), see Fig. 4.
4. If converting to LPG also remove the air reducing plate, see Fig. .
. Mount the enclosed nozzle (1), see Fig. 1.
6. Loosen the measuring branch screw (2) 1/4 turn; connect a manometer to the measuring
branch (2), see Fig. 4.
. Connect the power and select a programme with heat.
8. Start the dryer.
9. See nozzle pressure in table Fig. 1 - set the nozzle pressure on setting screw (4) under
cover screw (), see Fig. 4.
10. Check that the gas flame burns evenly and has a bluish colour.
11. Mount the cover screw (), see Fig. 4.
12. Close the operating panel.
NOTE:
After the conversion has been carried out, the enclosed sign with the new gas type
printed on it
must
be affixed to the dryer data plate, see instructions later.
4 + 3
Fig. 4
Fig. 5
2
1
ø
