Electrolux Swissline SL EWF 1880 User Information Download

Page: 7 / 44

Switching on the appliance for the first time –
setting the language

When switching on the appliance for the first time you should be sure to set
the language in which you want the indicators in the display to appear.

Press the control knob.

The appliance is now switched
on. The languages that can be
chosen will appear in the display.
In the factory the language is pre-
set to German.

Important:

If the display is not

showing any languages, the appliance has been switched on before. If this
happens, please see the section “Setting extra options: Language”, if you
want to change the language setting.

Use the control knob to high-
light the desired language.

Press the SELECT key.

From now on all indicators in the
display will appear in this lan-
guage.

Press the control knob to switch
off the appliance.

EXTRAS

SPRACHE

ANWÄHLEN

ENGLISH§

DEUTSCH)

ZURÜCK

ITALIANO§

FRANÇAIS§

EXTRAS

LANGUAGE

§§

SELECT

ENGLISH!)

DEUTSCH§§

BACK

ITALIANO§§

FRANÇAIS§§

EXTRAS

LANGUAGE

§§

SELECT

ENGLISH!)

DEUTSCH§§

BACK

ITALIANO§§

FRANÇAIS§§

Summary of Contents for Swissline SL EWF 1880













































Search results

Summary of Contents for Swissline SL EWF 1880

Reviews:

Related manuals for Swissline SL EWF 1880

Brands by name

Popular brands

Electrolux Swissline SL EWF 1880, User Information

Search results

Summary of Contents for Swissline SL EWF 1880

Reviews:

Related manuals for Swissline SL EWF 1880

Brands by name

Popular brands