Electrolux SPEEDELIGHT, Original Instructions Manual

Page: 34 / 38

34
4. Help the descent of the upper heating plate by guiding the
flexible tube (C).
5. The upper heating plate has to stand up right on the glass
saver.
6. Put a damp cloth all along the back area of the lid and
metallic frame.
7. Spray the cleaning product all inside the cooking chamber
with the delivered sprayer.
8. Allow to soak for 1 minute. The cooking chamber must be
hot for a good efficiency of the product.
9. Scrub the surface of the cooking chamber with an abrasive
sponge or pad.
10. Rinse with a wet cloth-paper.
11. Put in place the upper heating plate and push it to the
highest position until the «click».
12. Respect the right position of the upper heating plate: the
symbols must be in the front.
13. Guide the flexible tube to avoid damages.
14. Finish the cleaning by wiping the back of the lid and the
metallic frame.
15. Remove the glass saver.
Steam exaust chamber
1. Switch off the appliance and unplug the power cable.
2. Remove the front top cover (screwed button) and clean the
steam exaust chamber using a damp cloth or a sponge
soaked with ECOLAB Rapid Grease (0S1195).
3. Rinse and dry with cloth. Front top cover could be put into a
dishwasher
4. Before using the appliance, be sure to have re-installed
properly the front top cover.
IIM MP PO OR RT TA AN NT T
Check the complete cleanliness before to
re-install the front top cover.
Be sure that there is nothing (cloth,
sponge, paper towel …) left inside the
steam evacuation chamber
M M A AP PP PL LIIA AN NC CE E M MA AIIN NT TE EN NA AN NC CE E
W WA AR RN NIIN NG G
Refer to “
Safety Information
“
M M..1 1 IIn nffo orrm ma attiio on nss ffo orr m ma aiin ntte en na an ncce e
Routine maintenance operations can be carried out by non-
specialised personnel, carefully following the instructions
given below.
FRONT
1 mn
DETERGENT
H2O
FRONT
FRONT
2
1
3