Safety Precautions
4.
Mowing on banks and slopes can be
dangerous. Do not mow on
banks
or
steep
slopes.
5.
On slopes, be extra careful of your footing and
wear non-slip footwear.
6.
Mow across the face of slopes, never up and
down.
7.
Exercise extreme caution when changing
direction on slopes.
8.
Do not walk backwards when mowing, you
could trip. Walk never run.
9.
Never cut grass by pulling the mower towards
you.
10. Stop the lawnmower and remove the safety key
before moving the lawnmower across surfaces
other than grass and when transporting the
lawnmower to and from the area to be mowed.
11. Never operate the lawnmower with damaged
guards or without guards in place.
12. Always start the lawnmower carefully with feet
well away from the blades.
13. Do not tilt the lawnmower when the motor is
running, except when starting and stopping. In
this case, do not tilt more than absolutely
necessary and lift only the part which is away
from the operator. Always ensure that both
hands are in the operating position before
returning the appliance to the ground.
14. Do not stand in front of the grass discharge
chute when you start the motor.
15. Do not put hands near the grass discharge
chute whilst the motor is running.
16. Never pick up or carry a lawnmower while the
motor is running.
17. Stop the lawnmower and remove the safety
key:
-
before leaving the mower unattended for any
period;
-
before clearing a blockage;
-
before checking, cleaning or working on the
appliance;
-
if you hit an object. Do not use your
lawnmower until you are sure that the entire
lawnmower is in a safe operating condition;
-
if the lawnmower starts to vibrate abnormally.
Check immediately. Excessive vibration can
cause injury.
Maintenance and storage
1.
Keep all nuts, bolts and screws tight to be sure
the lawnmower is in safe working condition.
2.
Check the grassbox/grassbag frequently for
wear or deterioration.
3
Replace worn or damaged parts for safety.
4.
Only use the replacement blade, blade bolt and
blade adaptor specified for this product.
5.
Allow the motor to cool before storing in any
enclosure.
6.
To reduce fire hazard, keep the motor, battery
compartment and storage area free of grass,
leaves or excessive grease.
7.
Be careful during adjustment of the machine to
prevent entrapment of the fingers between
moving blades and fixed parts of the machine.
8.
Store in a cool, dry place where your
lawnmower is protected from damage.
Transport Safety
1.
Remove the safety key to prevent accidental
starting.
2.
Carefully fold the handle onto the machine.
3.
Make sure the cable is not trapped.
ENGLISH - 2
Handle Assembly
Assembly of Lower Handles to Deck
1.
Put Height of Cut Lever into highest cutting
position.
2.
Insert lower handles into deck as shown in
Fig
A
.
3.
Push each handle firmly down until it is located
securely into the deck
(B)
.
4.
Insert screw through the washer and into holes
using a pozidrive screwdriver and tighten fully
into deck as shown in
Fig B
.
Fitting Upper Handles to Lower Handles (C)
1.
Ensure the upper handle is located correctly
with the lock-off button on the switchbox
uppermost.
2.
Ensure the upper handle and the lower handle
are aligned correctly.
3.
Fit the bolts, washers and handle knobs.
4.
Fit the cables to the handles with the cable ties
provided, making sure the cables are not
trapped between the upper and lower handles.
Grassbox Assembly - Plastic Box
D2-A - location point
D2-B - clips
Plastic Box
1.
Insert the grassbox handle into the top of one of
the grassbox halves. Press firmly down and
forward until the handle clicks into position
(D1)
.
2.
Turn the grassbox half over and insert screw
into hole
(as illustrated in fig D1)
and tighten
fully.
3.
Position the two grassbox halves together and
press each location point
(D2)
into position
without
fully connecting the clips. When the
location points are matched correctly firmly
press the grassbox together until all clips are
securely connected.
(D3)
4.
To attach the grassbox to your lawnmower, lift
the safety flap
(D4)
and make sure the
discharge chute is clean and free from debris.
5.
Locate fully assembled grassbox onto 2 location
points at the rear of the deck
(D4)
.
6.
Locate safety flap onto the top of the grassbox.
Ensure the grassbox is securely located.
(D4)
•
Removal is the reverse procedure.
