Electrolux Pump Espresso EES250
Operating Insruction
ENGLISH
D. Hot Water Function
1. Make sure the applicace is stand-by (the indicator light is on)
2. Place the cup or the jug under the steam nozzle. Turn the steam/hot water
selector 90 degrees to the position of the steam mark (Figure 7) and wait
for hot water coming out (Figure 8)
.
3. Turn the steam/hot water selector to off. (Figure 9) Then the machine will stop
working.
NOTE: If the steam/hot water selector wasn't turned back to
"off", the applicance will produce peep sound when making
coffee. To release this alarm, please refer to page 20-Trouble
shooting.
E. Steam Function
1. Press the steam button once and then the steam ready indicator starts
flashing. When the light is always on, the machine has warmed up and is
ready to produce steam. (The coffee temperature indicator and the
steam ready indicator are both lighting on)
2. Fill the jug with 1/3 full of cold milk. For better result, use cold milk (0~5°C
whole-fat milk is suggested) and keep the steam nozzle cold.
3. Place the jug with milk under the steam nozzle and make sure the frothing
accessory is immersed in the milk. Turn the steam/hot water selector 90
degrees to the position of the steam mark (Figure 7) and wait for the
steam coming out. You will hear the pump operating; this is quite normal.
IMPORTANT: Do not allow the end of the nozzle to touch the bottom of the
jug as this could impede the flow of steam.
Summary of Contents for Pump Espresso EES250
Page 15: ...Electrolux Pump Espresso EES250 Operating Insruction ENGLISH 14 ...
Page 25: ......
