background image

g

15

0

Remove the plug from the mains.

0

Place the appliance horizontally on an 
iron rest or plate (Figure 5).

0

Set the steam selector (Figure 1/F) to 
position “4” (Figure 4/B) and allow all 
the mixture to flow through.

0

Afterwards repeat the procedure using 
clear water and then heat the steam 
iron briefly to allow the steam cham-
bers to dry. Your steam iron is now 
ready for use again.
As a precaution we recommend des-
caling every three months.

What to do, if ...

• no “steam” appears when using on a 

steam setting?
– In warm, dry air (during the winter), 

reduced amounts of vapour are nor-
mal because it is absorbed by the dry 
air before condensing.

– Emptying the filled water reservoir 

can wash out fluff. Remove the 
mains cord and tip the filled 
appliance forwards at an angle 
(Figure 7) so that the water can run 
out of the filling aperture.

• drops of water are coming out of the 

steam exit holes?
– Do not set the steam selector to 

position “1” or higher until the tem-
perature for steam ironing has been 
reached. If the temperature has been 
set too low for steam ironing 
increase the setting.

• stains appear on the washing while 

ironing?
– Clean the steam iron. Rub the sole-

plate while still warm with a mixture 
of water and vinegar or with a non-
abrasive cleaning agent. 

– When dry ironing fluff can enter the 

steam chambers and carbonise. This 
can lead to stains as the water pas-
ses through. Therefore also clean the 
inside of the water reservoir. Fill it 
with water and gently shake the 
steam iron. Then pour the water out.

• the soleplate is rough or furred?

– The iron temperature was set too 

high.

– Select the correct ironing tempera-

ture for the fabric (see ironing 
table).

Disposal

2

Packaging material

The packaging materials are environ-
mentally friendly and can be recycled. 
The plastic components are identified 
by markings, e.g. >PE<, >PS<, etc. 
Please dispose of the packaging mate-
rials in the appropriate container at 
the community waste disposal faci-
lities.

2

Old appliance

The symbol 

W

 on the product or on 

its packaging indicates that this pro-
duct may not be treated as household 
waste. Instead it shall be handed over 
to the applicable collection point for 
the recycling of electrical and electro-
nic equipment. By ensuring this pro-
duct is disposed of correctly, you will 
help prevent potential negative conse-
quences for the environment and 
human health, which could otherwise 
be caused by inappropriate waste 
handling of this product. For more 
detailed information about recycling 
of this product, please contact your 
local city office, your household waste 
disposal service or the shop where you 
purchased the product.

Summary of Contents for PERFECT DB 50










Reviews: