g
14
Ironing with Steam
To steam iron, set the temperature sel-
ector (Figure 1/N) to the required
fabric type and wait until the power
indicator (Figure 1/J) goes out - only
then set the steam selector(Figure 1/F)
to position “1”, “2”, „3“ or “4” (Figure
4/B). You will find which temperature
setting (fabric type) matches which
steam setting in the ironing table. As
soon as the steam iron is held horizon-
tally steam begins to form. When the
steam iron is set upright again the
steam supply stops automatically.
Spray Function (Figure 6/A)
The first time you use the appliance,
or if you have not used it for a long
time, you will need to press the spray
function button (Figure 1/G) several
times before water comes out of the
spray nozzle (Figure 1/D). You can also
use the spray function when dry iron-
ing.
Super Steam Jet Function
(Figure 6/B)
The super steam jet function is of
valuable assistance when ironing, for
example, creases, embroidery etc. You
can trigger the additional steam jet
both when steam ironing and when dry
ironing.
0
Set the temperature selector
(Figure 1/N) to the “max.” position and
wait until the correct temperature has
been reached, i.e., until the power indi-
cator (Figure 1/J) goes out.
0
Raise the steam iron a little away from
the material and press the steam jet
button (Figure 1/H).
Always wait another 5 seconds before
pressing the steam jet button again.
Steaming hanging items of
clothing
0
Turn the temperature selector
(Figure 1/N) to the “max.” position
and wait until the power indicator
(Figure 1/J) goes out.
0
Hang the article concerned on a han-
ger and hold the steam iron at
a distance of 10 – 20 cm from the
material.
0
Now press the steam jet button
(Figure 1/H). Wait at least 5 seconds
before pressing the button again.
1
Warning:
Do not attempt to freshen
up clothing whilst it is still being worn.
Risk of burning!
Storage
Remove the plug from the socket!
Set the temperature selector
(Figure 1/N) to the “Cold” position
(Figure 2/a) and the steam selector
(Figure 1/F) to position “0” (Figure 4/A).
Empty out remaining water (Figure 7).
Store the appliance standing upright.
To store properly wrap the mains cord
around the cord storage (Figures 1/M
and 8).
Care and Maintenance
Descaling
When using tap water for steaming,
limescale is deposited in the steam
chamber; heavy deposits reduce the
quantity of steam produced.
For descaling use lukewarm water and
vinegar essence – mixing ratio 1:1.
Pour the mixture into the appliance
when cold and disconnected from the
mains (Figure 3).
Proprietary brands of descaler are
too aggressive and must not be used!
0
Unplug from the mains.
0
Set the steam selector (Figure 1/F) to
position “0” (Figure 4/A).
0
Fill the water reservoir (Figure 1/O) to
the “MAX” mark.
0
Set the temperature selector
(Figure 1/N) to “max.”.
0
Insert the plug into the socket.
0
Wait until the power indicator
(Figure 1/J) goes out.
