Electrolux N7E, Installation And Operating Manual

Page: 8 / 32

8
• Before carrying out any operation on the machine, always consult the
manual which gives the correct procedures and contains important
information on safety.
Residual risks
• The machine has several risks that were not completely eliminated
from a design standpoint or with the installation of adequate protection
devices. Nevertheless, through this manual the Manufacturer has
taken steps to inform operators of such risks, carefully indicating the
personal protection equipment to be used by them. Sufficient spaces
are provided for during the machine installation stages in order to limit
these risks.
To preserve these conditions, the areas around the machine must
always be:
– kept free of obstacles (e.g. ladders, tools, containers, boxes, etc.);
– clean and dry;
– well lit.
For the Customer's complete information, the residual risks remaining
on the machine are indicated below: such actions are deemed
improper and therefore strictly forbidden.
R Re essiid du ua all rriisskk D De essccrriip pttiio on n o off h ha azza arrd do ou uss ssiittu ua attiio on n
Slipping or falling
The operator can slip due to water or dirt
on the floor
Burns/abrasions (e.g.
heating elements)
The operator deliberately or
unintentionally touches some
components inside the machine without
using protective gloves
Electrocution Contact with live parts during
maintenance operations carried out with
the electrical panel powered
Sudden closing of the lid/
oven door (if present) The operator for normal machine use
could suddenly and deliberately close the
lid/oven door (if present)
Tipping of loads When handling the machine or the
packing containing it, using unsuitable
lifting systems or accessories or with the
load unbalanced