background image

13

This is normal in humid weather. When
humidity is lower, the moisture  should
disappear.

See Occurrence section 

OPENING

/

CLOSING

OF

 

DOORS

/

DRAWERS

.

Move wire signal arm to "down" or ON
position.

Find the valve on water line near the
refrigerator and turn it on.

Unplug the refrigerator and turn off wa-
ter supply. Slide refrigerator out and lo-
cate where water is connected to the
valve. Unscrew the brass fitting and pull
out the screen from inside the valve mesh.
Clean the screen of foreign material. Re-
place screen and brass fitting and turn the
water supply on; check for leaks. Plug in
refrigerator and slide into place.

See Occurrence section 

TEMPERATURES

 

ARE

TOO

 

WARM

.

Turn off central water supply. Remove,
clean, or replace valve.

Ice maker should produce 2 1/2 to 4
pounds of ice every 24 hours.

See Occurrence section 

TEMPERATURES

 

ARE

TOO

 

WARM

.

Find the valve on water line near the
refrigerator and turn it on.

See Occurrence "Ice maker is not making
any ice" above.

Remove and shake ice bucket to separate
cubes.

Cover foods tightly. Discard stale ice.  Ice
maker will produce fresh supply.

Add filter to ice maker. Consult a water
purifying company.

OCCURRENCE

POSSIBLE CAUSE

SOLUTION

WATER/MOISTURE/FROST OUTSIDE
REFRIGERATOR
Moisture forms on outside of
refrigerator

Ice maker is not making any ice.

Ice maker is not making enough ice.

Ice maker is not separating the cubes.

Ice has bad odor and taste.

Weather is humid.

Door is slightly open, causing cold air
from inside the refrigerator to meet warm
air from outside.

Ice maker wire signal arm is in "up" or
OFF position.

Water supply valve in your home is not
open.

Water supply valve in refrigerator is being
blocked by foreign material.

Freezer is not cold enough.

Saddle valve on cold water pipe is blocked
or restricted by foreign
material.

Ice maker is producing less ice than you
expect.

Freezer is not cold enough.

Water supply valve in your home is not
completely open.

Water supply valve in refrigerator is being
blocked by foreign material.

Ice cubes are not being used frequently
enough.

Ice has picked up odor or flavor from
strong food stored in refrigerator or
freezer.

Water running to ice maker has poor
taste or odor.

AUTOMATIC ICE MAKER (some models)

BRASS FITTING

SCREEN

INLET, WATER LINE

OUTLET TO ICE MAKER

Summary of Contents for MRS20HRADD




















Reviews: