8
BEFORE SETTING SURFACE CONTROLS
Element on & hot surface indicator lights
Ceramic glass cooktops
(some models)
Your appliance is equipped with two different types of
radiant surface control indicator lights that will glow on
the control panel — the
on
indicator and the
hot surface
indicator lights.
The element
on
indicator light will glow when any surface
element is turned ON. A quick glance at this indicator
light after cooking is an easy check to be sure the surface
controls are turned OFF (See Fig. 1).
The
hot surface
indicator light will glow when any surface
cooking area heats up and will
remain on
until the glass
cooktop has cooled to a
MODERATE
level (See Fig. 2).
Types of ceramic cooktop elements
(some models)
The ceramic glass cooktop has radiant surface elements
located below the surface of the glass. The patterns on the
ceramic glass outline the size and type of element available.
The
single
radiant element has one round outline pattern
shown. The
dual
radiant element has two outline patterns.
The dual radiant element may be set using only the smaller
inner element or both inner and outer elements may be set
to heat together for a larger surface (See Fig. 3).
Dual radiant
surface control
(some models)
Fig. 3
Single radiant
surface control
Fig. 1
element ON indicator light
Fig. 1
Fig. 2
hot surface indicator light
Summary of Contents for MFF3015
Page 34: ...34 NOTES ...
Page 35: ...35 NOTES ...
