Immediately touch a desired heat
setting. After 3 seconds comes on.
To deactivate the function:
change the
heat setting.
4.6
Timer
You can set one timer function for each
cooking zone separately. To set a timer
function for the zones on the left side use
the timer on the left, for the zones on the
right, the timer on the right.
Count Down Timer
Use this function to specify how long a
cooking zone should operate during a
single cooking session.
First set the heat setting for the cooking
zone and then set the function.
To activate the function or change the
time:
touch quickly again and again
until the indicator of a given zone
lights up on the display. Then touch
or to set the time (00 - 99 minutes).
The function starts automatically after 4
seconds. comes on the display.
To activate the timer function for the
second zone in a pair touch 3 times
quickly.
When the time comes to an end, a signal
sounds and 00 flashes. Touch to stop
the signal.
To see the remaining time:
touch .
To deactivate the function:
choose the
desired zone touching and then touch
. The remaining time counts back to
00. The symbol goes out.
CountUp Timer (The count up
timer)
You can use this function to monitor how
long a cooking zone operates.
To activate the function:
for the first
zone in a pair touch twice quickly. The
function starts automatically when
lights up. To activate the function for the
second zone in a pair touch 4 times
quickly.
To see how long the cooking zone
operates:
touch . The display shows
the time, at first in seconds then in
minutes.
To deactivate the function:
choose the
desired zone touching and then touch
. The symbol goes out.
Minute Minder
You can use this function as a
Minute
Minder
when the hob is activated but
the cooking zones do not operate.
To activate the function: touch quickly
again and again until the indicator of
a given zone lights up on the display.
Touch or to set the time. The
function starts automatically after 4
seconds. comes on the display.
When the time comes to an end, a signal
sounds and 00 flashes. Touch to stop
the signal.
The function has no effect
on the operation of the
cooking zones.
4.7
STOP+GO
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, you cannot
change the heat setting.
The function does not stop the timer
functions.
To activate the function:
touch
.
comes on.
To deactivate the function:
touch
.
The previous heat setting comes on.
4.8
Lock
You can lock the control panel while
cooking zones operate. It prevents an
accidental change of the heat setting.
Set the heat setting first.
www.aeg.com
10
