Refer to "Induction cooking
surface" in "Daily use".
• Induction cooking zones adapt to the
dimension of the bottom of the
cookware automatically.
• The cooking zone efficiency is related
to the diameter of the cookware. The
cookware with a diameter smaller
than the minimum receives only a part
of the power generated by the
cooking zone.
• For both safety reasons and optimal
cooking results, do not use cookware
larger than indicated in "Cooking
zones specification". Avoid keeping
cookware close to the control panel
during the cooking session. This
might impact the functioning of the
control panel or accidentally activate
hob functions.
Refer to "Technical data".
Cookware types
Depending on the cookware type you
use, the hob determines the appropriate
bridge mode. For example:
Single triangles, standard cooking
zones, centre mode
180 mm
210 mm
350 mm
100 mm
Vertical mode, horizontal modes
The cookware must cover 3
or 4 single triangles.
WARNING!
Do not use baking tray.
8.2 The noises during operation
If you can hear:
• crack noise: cookware is made of
different materials (a sandwich
construction).
• whistle sound: you use a cooking
zone with a high power level and the
cookware is made of different
materials (a sandwich construction).
• humming: you use a high power level.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not
indicate any malfunction.
8.3 Öko Timer (Eco Timer)
To save energy, the heater of the
cooking zone deactivates before the
count down timer sounds. The difference
in the operation time depends on the
heat setting level and the length of the
cooking operation.
8.4 Examples of cooking
applications
The correlation between the heat setting
of a zone and its consumption of power
is not linear. When you increase the heat
setting, it is not proportional to the
increase of the consumption of power. It
means that a cooking zone with the
medium heat setting uses less than a
half of its power.
The data in the table is for
guidance only.
ENGLISH
19
