Electrolux FLF Series, Operating Handbook

Page: 42 / 64

0209
4
4
01106073
Page Notice Date
OPERATING
HANDBOOK
Safety devices
Feed safety device
The space between the feed safety fl ap and the drive bands is too small for you to enter your
fi ngers. The machine stops automatically as soon as the fl ap is pushed in.
Protection of motors
The motors have overload protection :
• by thermomagnetic circuit breakers and
• by the electrical selector (for movement).
Restarting the machine
You will not be able to restart the machine after it has stopped (power failure, emergency
stop, action on the feed safety device), until you have pressed one of the keys on the control
panel.
Gas heating
The gas burner is ignited and the fl ame is controlled by an electronic box that provides inte-
gral safety, for example if the fl ue draft is poor or if the gas supply is cut off.
An message on the control panel shows that the system has been put in a safe condition.
A pressure switch connected to the combustion products outlet turns off the machine’s hea-
ting function should extraction problems arise.
Accessibility
All casings can be disassembled using a special tool.
Heating safety device
The control panel applies an initial safety level at the time the machine starts up.
If the temperature is not reached after a given time, the heating command is deactivated.
The operation of the heating function is linked to the rotation of the cylinder. If the cylinder
should stop rotating for any reason, the machine stops heating.
A safety thermostat, which is independent of all electronic systems, limits the heating tem-
perature of the ironing cylinder in all circumstances, (except in the case of a steam heating
machine).
Power supply failure
If there is a mains power supply failure, use the handle to remove any washing engaged in
the machine. If the temperature is too high, use the handle to feed some wet washing and
protect the ironing bands.
4. Safety