1010
26
3
2
3
1
D1092
01106073
Page
Notice
Date
OPERATING
HANDBOOK
3. Method of use
Stopping the machine
To avoid potentially serious damage to the ironing belts and other components, follow these
instructions when shutting down the machine :
•
On steam heated machines, turn off the steam supply to stop the heating and slowly open
the trap-bypass valve to bleed.
•
Use the
STOP
function on control panel to begin the shut-down cooling process.
•
When the screen displays
"Stand by/Start"
, switch the main switch to the "OFF" position.
•
On gas heated machines, close the gas supply valve.
You can switch the machine off at any time by pressing on the machine stop switch; but
note that if the ironing cylinder is too hot (above 120 °C (248 °F), it can damage the
bands.
Handle
Using the handle
The dryer ironer is fi tted with a handle.
This is very useful to take out the washing
if there is a power failure while you are
ironing; or you can use it to feed a piece
of wet washing to protect the ironing
bands when the ironing temperature is too
high.
Lift the safety plate (1) then push (2) and
turn the handle in the clockwise direction
(3) to rotate the cylinder and take out the
washing.
Summary of Contents for FLF Series
Page 2: ... ...
Page 11: ...2 1741 7 01106073 Page Notice Date OPERATING HANDBOOK This page is left blank on purpose ...
Page 63: ... ...
