3. Press the OK/Start button to confirm.
4. Go to WATER HARDNESS .
5. Press the OK/Start button to confirm.
6. Use the scroll buttons to set the level of the water softener. Refer to the chart for the
right level to set.
7. Press the OK/Start button to confirm.
If the water softener is set electronically to the level 1, the salt indicator message stays off.
Use of dishwasher salt
Do these steps to fill the salt container:
1. Turn the cap counterclockwise to open
the salt container.
2. Fill the salt container with 1 litre of water
(only with the first operation).
3. Use the funnel to fill the salt container
with salt.
4. Remove the salt around the opening of
the salt container.
5. Turn the cap clockwise to close the salt
container.
It is correct that water comes out from the salt
container when you fill it with salt.
When the salt container is empty, the display shows a message: REFILL SALT .
The message does not show while a washing programme operates.
After you fill the salt container, the message can continue to stay on for some hours. This
does not have an unwanted effect on the operation of the appliance.
Use of dishwasher salt
11
