Electrolux EWW1142ADSA, User Manual, Page: 41 / 92

40 www.electrolux.com.cn
4.
5. Remove the polystyrene base.
6.
Put one of the polystyrene packaging
elements on the floor behind the
appliance. Carefully put down the
appliance with the rear side on it.
Make sure not to damage the hoses.
Pull up the appliance in vertical
position.
Remove the carton box. Remove the
polystyrene packaging materials.
Remove the plastic bag which cover
the machine.
2.
Open the door. Remove the
polystyrene piece from the door seal
and all the items from the drum.
3.
7. Remove the power supply cable and
the drain and inlet hoses from the
hose holders (A) on the rear of the
appliance.
41
A
14.2
Positioning
Use a spirit level on the top and side of
the Wahser-Dryer to check the levels.
If you do not have a spirit level, as a
guide use the edge of a door frame,
cupboard or bench to check that the
Wahser-Dryer is leveled.
It is important that your Wahser-Dryer
stands firm and leveled on the floor to
ensure correct operation. The appliance
must not be installed behind a lockable
door, a sliding door or a door with a
hinge on the opposite side to avoid
restricting the Wahser-Dryer door.
8.
9. Pull out the plastic spacers.
10. Put the plastic caps in the holes (X3).
You can find these caps in the user
manual bag.
Remove the three transit bolts.