Electrolux EWW1142ADSA, User Manual, Page: 13 / 92

12 www.electrolux.com.cn
1)
Vapour option can be combined with temperature 40°C to 90°C only.
2) Do not select a spin speed LOWER than that proposed by the appliance to avoid a too
long drying time so saving energy. In any case the reduction of the spin speed is only
possible after selecting drying.
3) This program can select only “Cupboard Dry” option.
1) Energy Saver program with 40degC and 1400rpm is recommended for a full load of
normally soiled cottons, and is the Water and Energy rating label program.
Program;
Temperature
range
– – –
1 kg
Type of load and soil level Max.
Spin
Speed
Max. Load
(Dry Clothes)
30°C, 40°C
Favourite Recall you favourite program.
1200
rpm
1 kg
WashDry 60;
Non-Stop washing and drying program for
3 - 5 shirts with lightly soil.
Woolmark Apparel Care - Blue
The wool wash cycle of this machine has been approved by The
Woolmark Company for the washing of wool garments labelled as
“hand wash” provided that the garments are washed according
to the instructions issued by the manufacturer of this machine.
Follow the garment care label for drying and other laundry instructions.
MXXXX
The Woolmark symbol is a Certification mark in many countries.
3.3 Program Options Compatibility
Program
Option
Cottons
Mixed
Bedding
Energy Saver
Vapour Refresh
Sports
Tub Clean
Spin
Rinse + Spin
Quick 15
Daily 60
Wool
Delicates
Favourite
WashDry 60
1)
2)
3)
2)
Dryness
Level
Prewash Time
Dry
Vapour Sensor
Wash
No
Spin
Rinse
Hold
− − − −
Delay
Start
− − −
Wash Dry
−
− − − − −
Easy
Iron
−
− − − −
13
3.4 Options
Wash/Dry Mode Touchpad
This touchpad is used to select Program
Mode of your machine. Program mode
available are :
Wash Only Mode (default)
●
Wash and Dry Mode
●
Dry Only Mode
●
/
Changing a running program mode
is possible only by switching off
the machine.
Temperature Touchpad
Press this touchpad repeatedly to
increase or decrease the wash
temperature if you want your laundry to
be washed at a temperature different
from the one proposed by the
Wahser-Dryer.
Spin Selection Touchpad
Press this touchpad repeatedly to
increase or decrease the spin speed or
select Rinse Hold, if you want your
laundry to be spun at a speed different
from the one proposed by the
Wahser-Dryer.
The door stays locked with the
water in the drum. To continue
the cycle, you must press
(Start/Pause).
●
●
No spin option eliminates all the spin
phases and increase the number of
rinses.
No Spin ( )
By selecting this option the water of
the last rinse is not emptied out and
the drum turns regularly to prevent the
laundry creases.
The door is still locked to indicate that
the water must be emptied out.
Rinse Hold ( )
( ) Touchpad
Select “ ” option to turn
ON the sensors for the dirt and detergent
residue.
The “SensorWash” is switched ON
by default. If you want to turn OFF
the sensor press this touchpad
once. (Please see the table
“Program Options Compatibility”
for which programs can be used
with this option.)
The initial time displayed on
the control panel indicates the
time needed for the maximum
dirt level.
Please see details of detergent
usage at “Detergents Type and
Quantity of Detergent”
When using this option, machine will
automatically check the dirt level and
detergent residue in your laundry. It will
automatically adjust the washing time
and numbers of rinses according to the
load to make sure that your clothes are
really clean.
The SensorWash technology consist of 2
different sensors for detection:
1) The 1
st Turbidity sensor detects the
dirt level at the start of cycle and
automatically calculates the actual
time needed to remove the level of
dirt in the wash; from low dirt levels
all the way to the maximum dirt level.
2) The 2
nd
Conductivity sensor will check
the amount of detergent residue after
the first rinse and the machine will
calculate the optimum number of
rinses (Maximum of 2 additional
rinses) needed to make sure that the
detergent residue is properly removed.
If a mode is not compatible with
program selected, the symbol “ ”
will flash on display along with
buzzer sound.