SOI/DT 2007-02 dmm
44/66
599 38 61-92
8.3
Description of options
•
Rinse-hold
→
Stops the appliance with water in the tub before the final spin cycle.
→
To drain the water, reset the programme and then select a drain or spin cycle.
•
Night cycle
→
Eliminates all spin phases and adds
three
rinses in COTTON cycles and
two
rinses in SYNTHETICS
cycles.
→
Stops the appliance with water in the tub before the final rinse.
→
Eliminates the buzzer (if configured)
→
To drain the water, reset the programme and then select a drain or spin cycle.
•
Pre-wash
→
Adds a pre-wash phase at the start of the cycle with water heating to 30°C (or cold, if selected).
→
In COTTON and SYNTHETICS cycles, performs a short spin before passing to the washing phase.
→
This option cannot be selected for WOOL and HAND-WASH cycles.
•
Soak
→
Adds a pre-wash phase (with duration of 30’ with wool cycle movement) at the start of the cycle with water
heating to 30°C (or cold, if selected).
→
In COTTON and SYNTHETICS cycles, performs a short spin before passing to the washing phase.
→
Together with the delayed start option it is possible to select a soak time from 30min to 10 hours.
→
This option cannot be selected for WOOL and HAND-WASH cycles.
•
Stains
→
Adds a 5-minute motor movement phase after heating to 40°C.
→
Ducts water to the pre-wash/stains compartment in order to introduce the special stain-removal product.
→
This option cannot be selected for DELICATES, WOOL and HAND-WASH cycles.
•
Bleach
→
Ducts water through the bleach compartment at the beginning of the first rinse in COTTON cycles.
•
Economy / Energy label
→
Modifies the structure of the COTTON 40-60 and SYNTHETICS 50/60 programmes in order to reduce
energy consumption.
→
Reduces the washing temperature.
→
Increases the duration of the wash phase.
•
Super-rinse
→
Adds
two
rinses in the COTTON, SYNTHETICS and DELICATES cycles.
→
Eliminates the intermediate spin cycles, with the exception of the final rinse, which is reduced to 450 rpm.
•
Half-load
→
Eliminates one rinse in COTTON programmes.
•
Easy-Iron
→
In COTTON programmes:
-
adds
three
rinse cycles
-
eliminates the intermediate spin cycles
-
performs an impulse spin phase
-
adds an “untangling” phase after the spin cycle
→
In SYNTHETICS cycles:
-
reduces the heating temperature in 50/60° cycles to 40°C
-
increases the washing time
-
prolongs the cooling phase at the end of the washing phase
-
adds
one
rinse
-
adds an “untangling” phase after the impulse spin cycle
