ENGLISH
%
13. Cancelling a programme
Turn the selector dial to position «Off» to cancel a
programme which is running. Now you can select a
new programme.
14. How to open the door during
the cycle of a programme
You can open the door, after having set the washing
machine to PAUSE phase, by pressing Start/Add
clothes button provided the following conditions
exist:
1) the washing machine is not in the heating
phase beyond 55°C
2) the level of the water is not high;
3) the drum is not turning.
After approximately 3 minutes, you can open the
door.
Pay attention to the level and temperature of the
water in the washing machine!
15. End of programme
The washing machine stops automatically at the end
of the ptogramme giving an audible signal.
If the No Spin
option has been selected, the LED
of the Start/Add clothes button goes off, the LED
and the End LED remain lit to indicate that the spin
phase is eliminated.
To spin the laundry select the spin speed by means of
the relevant button and then press the Start/Add
clothes button. The laundry is spun at the selected
spin speed.
Turn the programme selector dial to position «Off» to
switch the machine off.
Remove the laundry from the washing machine.
Check whether the drum is completely empty, by
rotating it with your hand. The purpose of this is to
prevent any items of laundry from remaining
accidentally in the drum, where they might get
damaged in a subsequent wash (e.g. by shrinking) or
bleed colour into another load of laundry.
We advise you to close the water supply tap and
disconnect the plug from the socket.
Leave the door ajar in order to air the washing
machine.
im_ewf1090_uk.qxd 07/09/2005 12:22 Pagina 17
