background image

28

Additional rinse cycles (RINSE+) (Spülen+, Rinçage+)

çage+)

The washing machine is set for very economical
water consumption. However, for people who suffer
from allergies, it can be helpful to rinse with extra
water. 

3

If RINSE+ is set, two extra rinse cycles are
added to the COTTONS/LINENS (Koch-/
Buntwäsche, Couleurs), EASY-CARES/
EASY IRON (Pflegeleicht/Leichtbügeln, Tex-
tiles Mélanges/Facile à Repasser) and DELI-
CATES (Feinwäsche, Délicat) programmes.
When the machine is delivered, no additional
rinse cycles are set.

To set additional rinse cycles:

1.

Turn programme knob to COTTONS/LINENS
(Koch-/Buntwäsche, Couleurs), EASY-CARES/
EASY IRON (Pflegeleicht/Leichtbügeln, Textiles
Mélanges/Facile à Repasser) or DELICATES
(Feinwäsche, Délicat) (with selected temperature).

2.

Press and hold the PRE-WASH (Vorwäsche, Pré-
lavage) and QUICK WASH (Kurz, Court) buttons
at the same time for at least 2 seconds. RINSE
(Spülen, Rinçage) and RINSE+ (Spülen+,
Rinçage+) light up on the programme progress
display. The additional rinse cycles are now set.
They remain stored until cancelled again.

3

Additional rinse cycles increase both water
consumption and programme duration.

To cancel the additional rinse cycles:

1.

Turn the programme knob to COTTONS/LINENS
(Koch-/Buntwäsche, Couleurs), EASY-CARES/
EASY IRON (Pflegeleicht/Leichtbügeln, Textiles
Mélanges/Facile à Repasser) or DELICATES
(Feinwäsche, Délicat) again.

2.

Press and hold the PRE-WASH (Vorwäsche, Pré-
lavage) and QUICK WASH (Kurz, Court) buttons
at the same time for at least 2 seconds. RINSE+
(Spülen+, Rinçage) lights up on the programme
progress display. The additional rinse cycles are
now cancelled.

Summary of Contents for EWF 1080









































Reviews: