background image

14

Opening and Closing the Door

To open: pull the door by the handle.
To close: push the door in firmly

When the appliance is switched on, the DOOR (Tür,
Porte) and the START/PAUSE (Start/Pause, Marche/
Pause) light indicate whether the door can be
opened

3

If the END (Ende, Fin) light flashes 4 times
and an acoustic signal sounds 4 times, it
means there was an attempt to start a wash
programme without closing the door prop-
erly. If this happens, push the door in firmly
and start the wash programme again.

Add the Washing

3

For the maximum filling quantities, refer to
the ”Program Tables”. For information on the
correct preparation of the washing, see
”Sort and Prepare the Washing”. 

1.

Sort and prepare the washing according to type.

2.

Open the filling door: Pull on the handle of the fill-
ing door.

3.

Fill with washing.

Attention!

 When closing the door, make sure no

items of washing get stuck! This could damage tex-
tiles and the unit.

4.

Close the filling door securely.

DOOR (Tür, 

Porte) light

Light 

START/PAUSE 

(Start/Pause, 

Marche/Pause)

Can the door 

be opened?

flashes

flashes

yes, after about 

2 minutes

lit

lit

no

1)

1) Door is locked due to high water level or high tem-

perature.

 is off

flashes

yes

Summary of Contents for EWF 1080









































Reviews: